"WELL-GEL O3" Ozone Infused USP Grade Organic Glycerin. 2oz. bottle. Buy 3, Get 1 Free. Shipping Included.

Won With Nature Well-Gel 03

An Ozonated Glycerin Product.

Won With Nature started making Ozonated Glycerin in early December of 2024 and began offering it to the public later that month. When I learned about the properties of Ozonated Glycerin, I set out to design a system which would make a viable batch of Ozonated Glycerin in a short period of time instead of the routine 4 to 10 days it can usually take. I figured if there was an emergency and a family member needed the unique properties of Ozonated Glycerin right away, a wait time of 4 to 10 days for a batch to be created would be frustrating for everyone involved.

Fast forwarding to today, in 6 hours we can produce a 700mL batch of Ozonated Glycerin which registers over 620mV and gives a reading of 15,000 ppm on high peroxide test strips, more than enough for most any situation where Ozonated Glycerin would be needed. The process is then continued until it reaches higher millivolt readings and parts per million readings (currently 680-701 mV and 30,000ppm minimum) which is the product offered to the public. Here is some information and a brief history of this intriguing product:

The Ozone Nebula! This is a sample video of the process I have used since December of 2024. This video shows hundreds of thousands of tiny Ozone Gas micro bubbles inside the Ozone Reaction Chamber. Pure Ozone Gas is converted under pressure into micro bubbles which are sent flooding through the reaction chamber. At the same time, these Ozone micro bubbles are folded into a controlled and perpetually rotating Toroidal flowing movement which sweeps through the center of the reaction chamber. I took this video 30 seconds after the Ozone micro bubble injection and Toroidal flow process had begun.

The reaction chamber eventually becomes so dense with Ozone micro bubbles that it quickly turns opaque and begins to resemble something akin to a vanilla milkshake. New Ozone micro bubbles are constantly being created and then injected into the Toroidal flow, resulting in a steady rotation of fresh Ozone Gas micro bubbles into the organic glycerin. Most of these bubbles are between .05 millimeters and 1.5 millimeters in size. The more bubbles you have, the larger the surface area contact you have between the Ozone Gas and the organic glycerin. Each Ozone gas bubble is essentially a tiny Ozone Reaction Chamber.

This process quickly increases the parts per million strength of the Ozonated Glycerin while simultaneously greatly reducing the amount of time needed to create batch after batch of Ozonated Glycerin. This is just one part of a multi-step process I have been using since December 2024. It easily produces batches of 15,000 parts per million Ozonated Glycerin in only 6 hours. The process is stopped when each batch registers a minimum of 680-701 mV and 30,000+ parts per million on high peroxide test strips. The parts per million is more important than the millivolt reading. The finished product is shipped with ice packs.

Well-Gel 03 (ozonated organic glycerin) is a clear, very sweet, thick fluid which has been saturated with pure high strength ozone gas from a high saturation ozone generator for extended lengths of time until a predetermined deep saturation point has been reached, at which time a sample of the resulting fluid is tested and the remainder is immediately bottled securely in laboratory grade glass and stored at -20 Fahrenheit so its unique powers and abilities can be stabilized in preparation for shipment. This product is shipped with ice packs. During its creation on up to the time of bottling, Well-Gel 03 will only come in contact with laboratory grade borosilicate glass containers, laboratory grade borosilicate fittings, laboratory grade borosilicate glass tubing, and laboratory grade borosilicate funnels. Silicone and stainless steel in any form, tubing or otherwise, is never used to transport ozone gas to the glycerin.

Well-Gel 03 does not have the sharp biting odor of other ozonated fluids and oils, like ozonated olive oil for example. There is no smell to linger on the skin or in clothing, and it will wash off the skin and out of clothing easily, leaving no trace of its original application. Well-Gel 03 has a smooth, silky feeling and will soften and moisturize the skin. It is very slippery. Well-Gel 03 can be diluted for use as a spray, or for use in nebulizers. Given human ingenuity, the eventual uses for such a product are likely endless.

The use of Ozonated Glycerin goes back to at least 1888 and was popularized in the late 1800’s and early 1900’s. After the pre-Civil War invention of the Ozone Generator, countless substances were saturated with ozone gas in the hopes of discovering new compounds for not only use in bodily rejuvenation, but other Sciences and disciplines as well. When it was glycerin’s turn to be saturated with ozone gas, the resulting product was found to have significant benefits and multiple uses. It was sold commercially in the early 1900's and had an impressive track record of helping people with various health issues. Within a few years however, Ozonated Glycerin and many other products and practices used to elevate human health were pushed out of the spotlight (despite their outstanding and widespread successes) in favor of pharmaceuticals. However, Ozonated Glycerin remained in use by a smaller number of health practitioners all throughout the 20^th century where it obtained, in some circles, an almost mythical status.

I first learned about the use of ozone gas and ozonated substances as a powerful therapy over 30 years ago. Years later, my interest in Ozone therapy was renewed by an old mentor of mine whom I jokingly called “The Man From O.Z.O.N.E.” (a nod the 1960’s TV show The Man From U.N.C.L.E. which I never watched, but I did enjoy the 2015 film) because he seemingly knew everything you could possibly know about ozone therapy and could answer any question I put to him, no matter how weird and out of left field my questions might have been. He made his own powerful ozone generators and his experience in turn helped me with modifications on my own ozone gas generators.

When the words "ozone gas therapy" are mentioned, many people automatically think you have to directly inhale the gas itself directly from an ozone generator. While we breathe in ozone gas all the time when we are outside, it’s greatly diluted by the time it reaches our lungs from its journey down to us from high in the Stratosphere, so we do not even notice it. However, the breathing in of ozone gas which has come directly from an ozone generator is an entirely different animal and I would strongly advise against the direct inhalation of such.

After years of making ozonated products for myself, my family, and others, it was an interesting side task to develop and put into use proprietary methods of creating what would eventually become Well-Gel 03. In the beginning I gave away large amounts (gallons, probably) of Well-Gel 03 to numerous longtime customers, friends, and those in need. The resulting feedback not only mirrored the positive experiences from the early 1900’s but also convinced me to offer Well-Gel 03 on my site for the general public. While Ozonated Glycerin is not really thought of as an herbal formula, coconut glycerin is plant sourced and does have benefits apart from its use in Ozonated Glycerin.

Won With Nature Well-Gel 03 comes in a blue Boston Round bottle as a symbolic reflection of the pale blue color of concentrated Ozone gas. This thick fluid can be diluted into a spray form by adding 45 drops of Well-Gel 03 to an ounce of pure water. Do not spray in the eyes, do not spray on or near sensitive areas of the body. A dropper is included to make measuring easier, I understand this is a thick and generally unwieldy fluid, but the included dropper will help you with measuring.

WELL-GEL O₃ comes in a 2oz Boston Round bottle.

Ingredients: Organic Coconut Glycerin, Ozone

Place in freezer immediately upon receipt of product for best shelf life.

NO MEDICINAL CLAIMS ARE MADE NOR IMPLIED

A Word About “TESTING”:

There are many ways to test the relative strength of Ozonated Glycerin, some are arbitrary and others are more reliable. I use multiple millivolt meters from different manufacturers and high power H2O2 testing strips made by two different companies to check each batch of Ozonated Glycerin. There are many unorthodox tests you can run on Well-Gel 03 or any ozonated glycerin.

When testing Ozonated Glycerin, the millivolt reading on a digital screen only tells part of the story, that number is not the entire story. I also use high peroxide testing strips and every batch must test at least 30,000 parts per million before I consider the batch ready to be pulled and placed in cold storage.

I have been through approx. 30 ORP meters and testers from companies both well known and not so well known. Many were complete garbage. At one time I was testing every meter I had, one after the other, on multiple samples from the exact same batch of Well-Gel 03 and 25 out of 30 meters gave me a different reading.

I quickly discovered that to have any hope of getting an accurate reading time after time, I needed to find 4 to 5 meters from different brands which all came within 3 to 5 points of each other. This way, I could test the most reliable meters against each other when testing the Ozonated Glycerin. Cheap “pen style” ORP meters were the first to get sent back for a refund due to their low quality, but I found bench top meters were much more reliable batch after batch.

I ended up personally calling a manufacturer in Ohio and expressing my frustration with the lack of standardization when using many different types of meters. I eventually spoke with a nice man whom I am 100% sure must be one of the most patient men I have ever conversed with due to the sheer number of questions I presented to him, but he answered all my questions and even asked me if I would be interested in personally visiting their facilities. I’m not sure if he meant their facilities in China or their facility in Ohio. I’ve already spent time in China and have no desire to go back anytime soon so I ended up not really answering him. In any case, what I discovered was that a lot of ORP testers which are commonly available all come from the same general area or factories in China and end up sitting on shelves for quite some time and the electrodes will dry out, giving false readings. While it may give an ozonated glycerin manufacturers ego a boost to get a reading of 700+ millivolts on a cheap ORP meter, it doesn't benefit the end user very much if the true mV reading is 400 or below.

The use of calibration fluid before each and every sample test is crucial and will help you visualize if your meter is working correctly. The temperature of the sample and calibration is also crucial when testing the pH of the OG. If you stick your probe into a 222mV calibration fluid and it reads “380mV” or “120mV” or some other number not even close to 222mV, then you are cheating yourself. Especially telling was spending $900.00+ for a better than average quality ORP meter which came with its own ORP calibration fluid, and the meter couldn't calibrate the manufacturers own supplied calibration fluid. Manufacturers know this happens, which may be one reason why I have never been refused a refund after explaining why I was returning the ORP meter.

I now have 5 different ORP meters: laboratory benchtop models from different manufacturers and upgraded handheld meters with large displays which for me have been quite reliable and each batch can be tested on every single meter after calibration has been achieved. It is the only way I have found to make sure each batch is accurately tested, along with consistent batch testing using high peroxide test strips from two separate manufacturers.

Currently all Well-Gel 03 must test a minimum of 680-701 mV and 30,000 parts per million on high peroxide testing strips before being removed from the reaction chamber and placed in cold storage. I have come to understand that the parts per million reading on a peroxide test strip is more important than the millivolt reading on an ORP meter.

Ozonated Glycerin which probably would test in excess of 900 to 1,200+ millivolts can be made, but I personally believe an Ozonated Glycerin which tests so high on a millivolt meter is most likely too strong a product to release in the world today because of the polluted planet we all live on, which leads to polluted Kidneys, polluted Lymphatic systems, and polluted Livers which we all have to contend with. The body has to deal with mop up and removal, but the vast majority of peoples lymphatic systems, kidneys, and livers are not ready to process a mass evacuation of opportunistic life forms, toxic fluids, heavy metals, and the resulting debris accumulated from such. Yes, extremely strong Ozonated Glycerin can be created, but just because you CAN do a thing, doesn’t mean you SHOULD do a thing. Back in 1984 I knew a group of mechanics who put a 500 cubic inch engine from a 1974 Cadillac Eldorado (curb weight 5,000 lbs.) into a 1973 VW Super Beetle (curb weight 1,800 lbs.) just because they could and they were so busy on the modifications they didn’t stop to ask if they should. I’ll give you three guesses as to what happened on its maiden voyage….but you’ll only need one.

While there is great potential with the creation of ozonated glycerin products, my guess is we will see the inevitable claims of "We have the strongest!" which happens, almost without exception, to every single new product introduced into the holistic/alternative world. The pursuit of making the strongest possible product ignores the fact that peoples bodies are burdened more than ever before with a laundry list of poisons which the Liver, Lymphatic System, and Kidneys are struggling to store away/filter/sequester until the day the burden on the liver drops to the point it can begin processing and releasing toxins and heavy metals which were tucked away years or decades before. For most people, the liver never gets to the that true detoxification stage.

Many products/herbs/supplements provide relief to the end user by simply shutting down the bodies detox pathways, which gives the user the impression they are getting better, when in reality they are simply making matters worse in the long run because poisons are building up in the tissues and liver instead of being allowed to leave the body. This is why I suggest using herbs only briefly and I do not suggest using herbs non stop for months and years. As for the Well Gel 03 Ozonated Glycerin, start slow (when first starting, some of you will only be able to use one drop of my Ozonated Glycerin at a time) and then gauge your personal reaction to any new product.